FPM10A Optical Fingerprint Sensor Module for arduino

• Product Description

  Optical fingerprint / biometeric sensor module – FPM10A with TTL/UART interface with full firmware support and a windows fingerprint capture software.

  Technical Specifications

• Power supply voltage: DC 3.6~6.0V
• Supply current: working current: <120mA
• Peak current: <140mA
• The time of fingerprint image input: < 1 seconds
• The window size: 14 x 18 mm
• Profile: 256 bytes
• Template file: 512 bytes
• Storage capacity: 1000
• False accept rate (FAR): < 0.001% (safety grade 3)
• FRR (FRR): < 1% (safety grade 3)
• The search time: < 1 seconds (1:500, mean)
• Computer interface: UART (TTL logic level)
• The communication baud rate (UART): (9600 x N) BPS where N=1 ~ 12 (the default value of N=6, namely 57600bps)
• Working environment: temperature: -20°C to +50°C
• Relative humidity: 40%RH to 85%RH (no treatment)
• Storage conditions: temperature: -40°C to +85°C
• Relative humidity: < 85%H (no treatment)
• Dimensions (L * W * H): 56 x 20 x 21.5mm

 

Notes:

Remove cable and under the connector you should find pin 1 mark. GND pin should have 0 ohms resistance with on board tantalum capacitors negative terminal.

Related Documents and Downloads

FPM10A Arduino Library Windows Fingerprint Capture Software FPM10A Datasheet

 

Pinouts

VCC (RED) GND (BLACK) RXD  (YELLOW) TXD (GREEN)

• Arduino interface library on github
• Datasheet (its not really a great datasheet and its Chinese but its better than nothing)
• Windows-only test software

 

نوشتن نظر

نام شما:


نظر شما: توجه : HTML ترجمه نمی شود!

رتبه: بد           خوب

کد امنیتی را در کادر زیر وارد نمایید: