Free shipping Ebyte E31-TTL-500 AX5043 UART 4km networking 433MHz DIP SMA UART Wireless module
Product Description
[ Model ]: E31-TTL-500
[ Interface ]: UART
[ Power ]: 27dBm
[ Distance ]: 4000m
[ RF connector]: SMA-K
[ Frequency ]: 433MHz (425-450.5MHz)
[ Feature ]: E31-TTL-500 is a wireless transceiver module based on AX5043 of AXSEM (two-way transmission available). The module adopts FEC (forward error correction) algorithm, which greatly improve the anti-interference ability. E31-TTL-500 can be compatible with other Ebyte E31 series modules.
Electrical Parameter
No.
|
Parameter item
|
Parameter details & description
|
1
|
Size
|
24 * 43mm(without antenna and SMA)
|
2
|
Frequency Band
|
425 - 450.5MHz, default: 433.0MHz, channel:256, 100kHz stepped frequency,Recommending frequency: 433±5MHz,
|
3
|
Connector
|
1*7*2.54mm,plug-in
|
4
|
Supply voltage
|
2.8 - 5.5V DC (Note: the voltage higher than 5.5V is forbidden.)
|
5
|
Communication level
|
UART, USART
|
6
|
Operation Range
|
About 4000m(test condition:clear and open area& maximum power,antenna gain: 5dBi,height:> 2m,air data rate: 1.2Kbps)
|
7
|
Transmitting power
|
Maximum 27dBm(500mW)| four optional level(0-3),step by 3dBm
|
8
|
Air data rate
|
Default 1.2kbps, can be configured to 1.2,2.4,4.8,9.6,19.2,38.4,50,70Kbps
|
9
|
Standby current
|
1.7uA(mode 3,M1=1,M0=1)
|
10
|
Transmitting current
|
390mA at 27dBm
|
11
|
Receiving current
|
12.5mA(mode 0 or mode 1) | minimum 30uA(mode 2 + 2s wake-up time)
|
12
|
Communication interface
|
UART, 8N1,8E1,8O1, eight kinds of UART baud Rate, from 1200 to 115200 bps
|
13
|
Driving mode
|
UART can be configured to push-pull/high pull, open-drain
|
14
|
Transmitting length
|
512 bytes buffer,43 bytes per package
|
15
|
Receiving length
|
512 bytes buffer,43 bytes per package
|
16
|
Address
|
65536 configurable addresses(easy for network, broadcast and fixed transmission)
|
17
|
RSSI support
|
built-in intelligent processing
|
18
|
Sensitivity
|
-126dbm at 1.2Kbps(sensitivity has nothing to do with serial baud rate and timing)
|
19
|
Antenna type
|
SMA-K(External thread hole, 50 ohm impedance)
|
20
|
Operating temperature
|
-40 ~ +85℃
|
21
|
Operating temperature
|
10% ~ 90%
|
22
|
Storage temperature
|
-40 ~ +125℃
|
Operation Mode
Mode(0-3)
|
M1
|
M0
|
Mode introduction
|
Remark
|
Mode 0
Normal
|
0
|
0
|
Transparent transmission is on.
|
The receiver must be in mode 0 or 1.
|
Mode 1
Wake-up
|
0
|
1
|
Act as transmitter,can be used to wake up the module works in mode 2.
|
The receiver can be in mode 0,1,2.
|
Mode 2
Power-saving
|
1
|
0
|
Act as receiver, can be awakened by the module works in mode 1.
|
Transmitting is not allowed.
|
Mode 3
Sleep
|
1
|
1
|
Parameter setting
|
|