Feature:
-Single chip USB 2.0 to 10/100M Fast Ethernet controller
-Single chip USB 2.0 to RMII, support HomePNATM and HomePlug PHY
-Single chip USB 2.0 to Reverse-RMII, supports glueless MAC-to-MAC connections
-USB Device Interface
--Integrates on-chip USB 2.0 transceiver and SIE compliant to USB Spec 1.1 and 2.0
--Supports USB Full and High Speed modes with Bus-Power or Self-Power capability
--Supports 4 or 6 programmable endpoints on USB interface
--Supports AutoDetach power saving, Detach from USB host when Ethernet cable is unplugged
--High performance packet transfer rate over USB bus using proprietary burst transfer mechanism (US Patent Approval)
-Fast Ethernet Controller
--Integrates 10/100Mbps Fast Ethernet MAC/PHY
--IEEE 802.3 10Base-T/100Base-TX compatible
--IEEE 802.3 100BASE-FX compatible
--Supports twisted pair crossover detection and auto-correction (HP Auto-MDIX)
--Embedded SRAM for RX/TX packet buffering
--Supports IPv4/ IPv6 packet Checksum Offload Engine to reduce CPU loading, including IPv4 IP/TCP/UDP/ICMP/IGMP & IPv6 TCP/UDP/ICMPv6 checksum check & generation
--Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control
--Supports 2 VLAN ID filtering, received VLAN Tag (4 bytes) can be stripped off or preserved
--PHY loop-back diagnostic capability
-Support Wake-on-LAN Function
--Supports Suspend Mode and Remote Wakeup via Link-change, Magic packet, MS wakeup frame and external wakeup pin
--Supports Protocol Offloads (ARP & NS) for Windows 7 Networking Power Management
--Optional PHY power down during Suspend mode
-Versatile External Media Interface
--Optional RMII interface in MAC mode allows AX88772B to work with HomePNA and HomePlug PHY
--Optional Reverse-RMII interface in PHY mode allows AX88772B to support glueless MAC-to-MAC connections
-Advanced Power Management Features
--Supports dynamic power management to reduce power dissipation during idle or light traffic period
--Supports very low power Wake-on-LAN (WOL) mode when the system enters suspend mode and waits for network event to awake it up
-Supports 256/512 bytes (93c56/93c66) of serial EEPROM (for storing USB Descriptors)
-Supports embedded ID SRAM (online programmable memory for USB Device Descriptors ,etc) to save external EEPROM
-Supports automatic loading of Ethernet ID, USB Descriptors and Adapter Configuration from EEPROM after power-on initialization
-Integrates on-chip voltage regulator and only requires a single 3.3V power supply
-Single 25MHz clock input from either crystal or oscillator source
-Integrates on-chip power-on reset circuit
-Small form factor with 64-pin LQFP RoHS compliant package
-Operating over 0°C to 70°C or -40 to +85°C temperature range
Target Applications: |
||
|
http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=105;71;101