مشخصات فنی
-
برخی از بردهای رسپری پای با استفاده از پین های GPIO به راحت و بدون نیاز به سیم بر روی این برد سوار می شوند و می توانند از قابلیتهای این برد استفاده کنند.
-
ولتاژ ورودی 6 تا 23 ولت را تامین می کند.
-
می تواند پورت HDMI را به پورت VGA تبدیل کند.
-
دارای اس دی و میکرو اس دی کارت است.
-
3 پورت USB را پشتیبانی می کند.
-
8 تا کانال برای درایو کردن servo موتور دارد.
-
سایز آن 88*56 میلی متر است.
- Directly connected on top of the Raspberry Pi using the board GPIO header pins, and no wiring nor soldering is required
- Duplicated the 26-pin header of the R-Pi in order to support existing expansion boards
- Input Voltage: 6V to 23V converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi
- VGA: HDMI to VGA converter supporting up to UXGA (1600×1200) and 1080p with 10-bit DAC
- USB: Self-powered USB hub with 3 ports
- Storage: SD and micro SD card reader
- RTC: Based on NXP PCF2127AT / PCF2129AT with included CR2032 battery
- Debugging: RS232 DB9 connector (via MAX3232) to be used with a null-modem cable
- I/Os: Reset switch for RPi reset, headers to access S1 & S5 on top of the Raspberry Pi
- Servo support: 8-channel Darlington driver chip (ULN2803) allowing to control electronic circuits which require more current
- Misc: DIP switch to remove connection from RPi’s pin header
- Dimensions: 85 x 56mm (Same size as Raspberry Pi)
* This expanson board is suitable for Raspberry Pi Rev 2 Model B.